SA-3 cylinder shape burrs are perfect for interior contour work and deburring. Due to the extreme hardness of the tungsten carbide, it can be used on a lot more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs are usually suited for ferrous and non-ferrous metals, soft steel, and for all non-metal materials including stone, plastics, real wood, and ceramic. Double cut burrs leaves a somewhat smoother finish than single cut because of producing smaller chips because they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is among the most popular cut and will see you through most applications.
Machines Utilized on:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Cast Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are ideal for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed is decided from the material you use your burr on. If you might be experiencing chipping, you’re probably operating at excessive of speed for your application. Start having a slower speed and increase as you go along and soon you get the greatest results
Apply light pressure and allow tool perform the work. Bearing recorded on the tool can result in reduced tool life plus a dull burr.
Always wear proper PPE to incorporate (however, not limited to) safety glasses, hearing protection, respirator, and hand protection. Keep all guards in position on your machine.
Avoid experience electricity drills; the slower speeds may result in chipping of one’s workpiece.
More info about SA-3 Carbide Burrs go to the best web portal