Use tungsten carbide burrs on hard materials including steel, aluminum and iron, all kinds of stone, ceramic, porcelain, wood floor, acrylics, fibreglass and reinforced plastics. When utilized on soft metals like gold, platinum and silver, carbide burrs are great because they will last for years without having breaking or chipping.
Different cuts of carbide burrs will probably be best suited for several materials.
Ways to use SB-3 Carbide Burr Die Grinder Bit
Use carbide burrs in air tools like die grinders, pneumatic rotary tools and speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools say for example a Dremel.
Carbide burrs are traditionally used for metalworking, tool making, engineering, model engineering, wood carving, jewelry making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. Carbide burrs are widely-used within the aerospace, automotive, dentistry, stone and metalsmith industries.
What SB-3 Carbide Burr cut if you undertake?
Single cut (one flute) carbide burrs have a right handed (up cut) spiral flute. Single cut can be used with metal, hardened steel, copper, surefire and ferrous metals and will remove material quickly having a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy elimination of material
Milling
Deburring
Cleaning
Creates long chips
Use double cut carbide burrs on ferrous and non ferrous metals, aluminium, soft steel and for all non-metal materials for example stone, plastics, wood floor and ceramic. This cut has more cutting edges and may remove material faster. Double cut otherwise known as Diamond Cut or Cross Cut (2 flutes cut across each other) and will leave a smoother finish than single cut due to producing smaller chips while they cut away the pad. Use double cut for medium-light stock removal, deburring, finishing and cleaning. Double cut carbide burrs are most widely used and work for most applications.
Medium- light elimination of material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
What SB-3 Carbide Burr RPM speed should you use?
The speed of which you use your carbide burr inside your rotary tool is dependent upon the information you’re deploying it on along with the contour being produced but it’s safe to assume you don’t need greater than 35,000 RPM. If the burs are chipping easily this might be because of the speed being not fast enough. It’s ideal to start the bur off slow, helping the speed during this process. High speeds may prevent clogging from the flutes of your carbide burs.
As with every drill bits and burrs, permit the burr perform the work and apply simply a little pressure, otherwise the cutting edges with the flutes will chip away or become smooth prematurely, decreasing the life of your burr.
For more details about SB-3 Carbide Burrs check the best webpage