Use tungsten carbide burrs on hard materials including steel, aluminum and cast iron, all types of stone, ceramic, porcelain, hard wood, acrylics, fibreglass and reinforced plastics. When utilized on soft metals such as gold, platinum and silver, carbide burrs are fantastic because they lasts for a long period without having breaking or chipping.
Different cuts of carbide burrs will be ideal for many materials.
Purposes of SB-3 Carbide Burr Die Grinder Bit
Use carbide burrs in air tools like die grinders, pneumatic rotary tools and speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools for instance a Dremel.
Carbide burrs are widely used for metalworking, tool making, engineering, model engineering, wood carving, jewelry creation, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. Carbide burrs are employed inside the aerospace, automotive, dentistry, stone and metalsmith industries.
What SB-3 Carbide Burr cut should you choose?
Single cut (one flute) carbide burrs have a right handed (up cut) spiral flute. Single cut is employed with stainless, hardened steel, copper, surefire and ferrous metals and may remove material quickly with a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy elimination of material
Milling
Deburring
Cleaning
Creates long chips
Use double cut carbide burrs on ferrous and non ferrous metals, aluminium, soft steel as well as for all non-metal materials such as stone, plastics, real wood and ceramic. This cut has more cutting edges and can remove material faster. Double cut also known as Diamond Cut or Cross Cut (2 flutes cut across the other person) and can leave a smoother finish than single cut because of producing smaller chips while they cut away the pad. Use double cut for medium-light stock removal, deburring, finishing and cleaning. Double cut carbide burrs are most widely used and work with most applications.
Medium- light eliminating material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
What SB-3 Carbide Burr RPM speed the use of?
The rate of which you utilize your carbide burr within your rotary tool will depend on the pad you’re using it on along with the contour being produced but it’s safe to say you don’t need a lot more than 35,000 RPM. In the event the burs are chipping easily this might be due to the speed being not quick enough. It’s ideal to get started on the bur off slow, enhancing the speed as you go along. High speeds prevents clogging within the flutes of your respective carbide burs.
As with all drill bits and burrs, let the burr carry out the work and apply just a little pressure, otherwise the cutting edges of the flutes will chip away or become smooth too rapidly, minimizing the time of your burr.
To read more about SB-3 Carbide Burrs see our new internet page