The Xbox One system is definitely a wonderful package in itself. However, with games like Cod 5, Modern Warfare, and Modern Warfare 2, more and more people find good reasons to change the said video game console, or its accessories. One modification is really a reply to build a rapid fire modded Xbox controller. Listed here are the steps concerning how to modify your original controller to some rapid fire controller.
Step one. Unscrewing the controller
Before you begin taking your controller apart, have a critical look with the controller first and attempt to remember which parts go where because you eventually ought to put everything returning. Start by unscrewing all of the visible screws at the back. After this, when you tug on the case, remove the batteries to reveal the hidden screws. Remove these as well.
Step 2. Preparing the truth
Using the controller facing down, slowly and thoroughly separate the leading half the casing through the circuit board. An opening in the event will eventually should be made. Remember this before putting things back.
Step # 3. Placing The Rapid Fire Button
While other ways of modifying the controller tend not to involve setting up a brand new button, this specific guide does. Not only does this assist you to adjust the speed of rapid fire, it minimizes tampering with aspects of the circuit board, thereby minimizing the chance of damaging your modded Xbox One console controller.
Remember, kits for that rapid fire controller can be obtained easily. It’s the button from this kit that’ll be placed from the hole within the casing, so put it gently prior to circuit board is returned. You might have to snip out a number of flaps to create means for the wires in the kit. This can be achieved with the cutter or perhaps a set of scissors.
Step 4. Soldering
Assuming that you are aware how to properly utilize a soldering iron, attach the red wire for the leftmost pin of a 4-pin horizontal series, while the blue wire solders to the rightmost pin of the series. The black (or green occasionally) wire attaches on the core three vertical series to the correct with the switch.
Soldering is the most crucial step to making the modded Xbox One system controller. It is because mistakes made within this stage can permanently damage your controller.
Step five. Putting everything back
Carefully being attentive to the wires, try to close the circuit board along with the casing. Pest little tricky since the new wires can get in the form of things. Find a way for these wires to occupy the empty spaces instead of sticking out. You could possibly hold the modded Xbox controller facedown so that the buttons don’t fall and maneuvering the wires certainly are a little easier. Squeeze casings together but don’t return the screws yet.
modded controllers xbox one have to verify that the rapid fire buttons work. When they don’t, you may have to restart both your console and the now modded Xbox One controller. This would solve the issue. If it doesn’t you might require from the steps again to check.
For more information about mod controllers ps4 website: check here.