SA-1 cylinder shape burrs are perfect for interior contour work and deburring. Due to the extreme hardness of the tungsten carbide, it can be used on a lot more demanding jobs than HSS (High-Speed Steel). These carbide burrs are constructed of tungsten carbide burr die grinder bits and will will soften at higher temperatures, so carbide is obviously a good choice for long-term performance.
Double cut or Cross cut carbide burrs are generally applied to ferrous and non-ferrous metals, soft steel, as well as for all non-metal materials for example stone, plastics, wood floor, and ceramic. Double cut burrs leaves a rather smoother finish than single cut as a result of producing smaller chips since they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is easily the most popular cut and will look at you through most applications.
Cut – Double Cut
Max RPM – 70,000, yet it’s uncommon to wish a lot more than 35,000 RPM.
Machines Suited for:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Surefire, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are perfect for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed will be determined through the material you use your burr on. If you are experiencing chipping, you are most likely operating at excessive of speed for your application. Start having a slower speed and increase on the way until you get the greatest results
Apply light pressure and let the tool carry out the work. Bearing down on the tool will lead to reduced tool life as well as a dull burr.
Always wear proper PPE to add (and not limited by) safety glasses, hearing protection, respirator, and hand protection. Keep all guards in place on your own machine.
Avoid experience electrical energy drills; the slower speeds may lead to chipping of your respective workpiece.
For more information about SA-1 Carbide Burrs visit our new net page