We have found a directory of the most widespread shapes of carbide burrs:
Cylinder end-cut shape
Cylinder end-cut shape possesses a flat end and is ideal for implementing materials who have right angles and also eliminating features. When completing contours on materials, a well known solid carbide burr. Flat surfaces are taken from many materials. Carbide cylindrical form end cut burs works extremely well for either end or side cutting because of their versatile nature. Deburring and polishing flat bottom holes and slots are two common applications for them.
Cone shape
Deburring gear teeth, heat exchanger fan blades, inner bevel edges, and internal pipe edges are one of the applications in which cone-shaped carbide burrs are developed. Exactly the same function as a countersink, plus chamfers the interior of holes intentionally.
Taper shape
Removing round features from your workpiece generates a product that is much more seamless. An operating instrument that’s capable of access restricted locations and machine material surfaces
Flame shape
When cutting materials with round edges, utilize a carbide burr shaped like a flame. The flame way of carbide burrs is supposed to be used in deburring and polishing elliptic surfaces on steel dies, forgings, castings, and metal patterns.
Tree shape
just like a tree to look at though a pointy tip at the very top. The round edges are ground by the group of carbide burrs in succession. This type assists you to easily access lengthy, tight locations are inaccessible using the majority of the other shapes. Deburring and completing the deep contoured surfaces of steel dies, moulds, and metal patterns include the primary functions that Tree Shape carbide burrs are meant to do. They may also be employed to restore damaged places on dies which were brought on by slugs.
Oval shape
When you continue to work with your project, this perfect carbide burr efficiently clears round edges about the workpiece that’s been handed for you. Oval-shaped carbide burs bring deburring and polishing curved surfaces in steel dies, forgings, castings, and metal patterns. These burs are made from an oval cross-section. One can use them for that process of treating difficult fillet welds.
Ball shape
Carbide Deburring round bottom holes, curved slots, and curved metal and material surfaces are the applications in which ball-shaped burs were devised. Furthermore, you may use these to widen or lengthen tiny holes to enable you to treat hard fillet welds. The smooth machining of most round edges of workpieces, as well as the preparation of workpieces for brazing, is manufactured possible by the ball shape.
For more information about SB-9 Carbide Burrs go this net page